Skip to main content
HOME
CALENDAR
AGENDAS
PUBLIC NOTICES
OFFICES
DEPARTMENTS
BUILDING
STREET
SEWER
WATER
BOARDS / COMMISSIONS
VILLAGE POLICE
VILLAGE COURT
FORMS / CODES
MINUTES / REPORTS
PROPOSALS / DOCS
LOCAL NEWS
COMMUNITY LINKS
CONTACT US
    
Water Department

Village of Ellenville ~ 2 Elting Court Ellenville, NY 12428 ~ 845.647.7080
  
  
Michael Avery
SR WTPO
845.647.5740
mavery@villageofellenville.com
    
Thomas VanLeuven
Water Plant Operator
    
Fred Hart
Municipal Worker l
  
How are water characteristics measured?

Due to the development of increasingly more sensitive scientific instruments, it is possible to measure water characteristics in precise and minute quantities that previously went undetected.
The Water Quality Report shows measurements in parts per million, which is equivalent to milligrams per liter, and parts per billion, which is the same as micrograms per liter.
  
To put these measurements into perspective, consider that one part per million, in time, would be one second out of 11 1/2 days. One part per billion translates into just one second in nearly 33 years.
  
Water Quality
The Village of Ellenville Water Department does everything possible to ensure that water will be of high quality when it arrives at your water meter. Unfortunately, there are a number of things that can affect the quality of your water in the plumbing of your own home.There are many things the homeowner can do to improve water quality if the plumbing decides to act up. These include disinfecting drains, flushing and disinfecting water heaters, and flushing plumbing.In addition, since emergency situations might interrupt water service in the village, we have instructions for treating and storing an emergency supply of water.
  
  
How To Treat and Store Water For An Emergency
Treating potentially contaminated water in an emergency
  
During an emergency, like major flooding, the Ellenville Water Department may issue a "boil water notice" until we can verify that the water is not contaminated and is safe to drink. During a "boil water notice" any water used for drinking or food preparation should be boiled at a full rolling boil for at least one full minute. A full rolling boil is a vigorous boil that can not be stopped by stirring the water. If the water is very dirty looking and/or has particulate matter in it, filter the water through a coffee filter, paper towels, or clean cloth before boiling.
  
If the emergency has left you with no way to boil the water or if you have limited fuel and do not want to use it for boiling water, you may treat the water with liquid chlorine laundry bleach. NOTE: do not use scented laundry bleach, powdered bleach, or swimming pool chlorine - these contain additional chemicals that are poisonous. Below is a chart showing how much liquid bleach to add to the water.
  
Quantities of bleach used to treat water for emergencies
  
Amount of Water
Amount of bleach to add to clear water
Amount of bleach to add to cloudy water
    1 gallon
8 drops
16 drops
    5 gallons
½ teaspoon
1 teaspoon
    55 gallons
2 tablespoons
¼ cup

  

After you add the bleach, thoroughly mix by stirring or shaking the container. Let the water stand for 30 minutes before using. A slight chlorine odor should be noticeable in the water, if not, add another dosage of bleach and allow the water to stand another 15 minutes before using.

  

The water can also be treated with the use of water purification tablets which can be purchased at most outdoors or sporting goods stores. Follow the directions for use on the package you purchase.
Treat only enough water to meet your needs for 48 hours at a time. There is an increased chance of recontamination if the treated water sits for more than 48 hours. Refrigeration will also help avoid recontamination.

  

Note: Most home water filters are meant for water that is already microbiologically safe. Using these filters during a "boil water notice" will not guarantee the safety of the water. Replace any filter cartridges after the boil water notice has been lifted to insure your filter is not contaminated.

  

How to store an emergency water supply
Bottled water purchased at grocery stores can be stored for several years. The bottles should be stored in a cool dark place and should not be exposed to sunlight or fumes of petroleum products and pesticides/herbicides. They should be checked periodically to insure that the plastic has not cracked or developed leaks. If the containers have cracked or leak, replace them.
  
Storing tap water for emergency use is more complicated. The storage containers must be sterilized and the water must be treated before it is stored. Also the water should be changed every six months.
  
Sterilizing the containers:
Containers made of heavy opaque plastic with screw-on caps are the best to use. Plastic milk and orange juice containers are very thin and tend to crack and leak as they get old. Also these containers often have snap-on lids that do not seal as well as screw-on caps.
  
1. Wash the containers with soapy water.
2. Rinse thoroughly.
3. Fill the container half full with water and add 1 cup of chlorine bleach for each gallon the container holds. NOTE: do not use scented laundry bleach, powdered bleach, or swimming pool chlorine - these contain additional chemicals that are poisonous. Finish filling the container with water (all the way to the top). Put the cap on and lay the bottle on its side for about 3 minutes. This allows you to check if the container leaks while the bleach-water disinfects the cap. If the container leaks, do not use it.
4. Pour the bleach-water into the next container to be sterilized. The same disinfecting bleach-water can be used for several containers " simply "top off" the new container with water as needed.
*** REMEMBER this is not drinking water - pour down drain when finished ***
  
Treating the water to be stored:
1. Fill the sterilized bottle half full with tap water.
2. Add 8 drops of chlorine bleach for each gallon the container holds. NOTE: do not use scented laundry bleach, powdered bleach, or swimming pool chlorine - these contain additional chemicals that are poisonous.
3. Finish filling the bottle with tap water. Leave a small air space at the top of the container to allow for expansion if the water heats up slightly where you store it.
4. Put the cap on tightly.
  
Storing the water:
The water containers should be stored in a cool dark place and should not be exposed to sunlight or fumes of petroleum products and pesticides/herbicides. They should be checked periodically to insure that the plastic has not cracked or developed leaks. If the containers have cracked or leak, replace them.
  
Change the water in the containers every six months.